 |
Para esta marca existem modificações - pode escolhe-las em baixo, apуs conhecer a anotação e descrição porminorizada |
Explicação, anotação:For priming of metal, wood surfaces under compensations by different enamels.
Descrição porminorizada da marca:The prime coating represents the suspension of pigment and filling agents in alkyd varnish with the addition of dissolvents, siccative and stabilizing substances.
the technical characteristics:
1. Funnel viscosity on burrow viscometer middle ïêîçàò.
Â3-246 type with bore of nozzle 4ìì,
in case of (20+/-0, 5) degree. With, with, no less than. 45 70-90
2. Mass fraction of low-volatile matters, %. 58-68 66-68
3. Perimeter degree, micrometre, not more. 50 35-40
4. Drying time to ñòåïíè 3, not
more than in case of t (105+/-5) degree. With, minute. 50 35
in case of t (20+/-2) degree. With, part. 24 21
5. Film hardness on ìàÿòíèêîâîìó
type device of ÌÝ-3, qualified
units, no less than. 0, 22 0, 31
film durability to nitroenamel action: must not be exfoliations, the spilling, the film wrinklings of nitroenamel, coated on prime coating.
the way of application:
before application the prime coating carefully mix, if required dilute dissolvents (solvent, acids, white spirit). In the presence of film of it removes to mixing.
the prime coating inflict by the brush, platen, and êðàñêîíàíîñèòåëåì on dry. Preliminary dust-free, fat and other pollutants, rusts, scales of surface.
when applying the prime coating on old compensation, last is to be ïðîøëèôîâàíî and are abluted dissolvent.
drying time of one-layer coating at a temperature of (20+/-2) degree. With - 24 hrs.. Prime coating expenditure 60-100 ã/ì^2 on one-layer coatings. The prime coating keep in densely closed container, preventing from moisture and direct sunlights.
precaution:
while exercising of paint works, as well as after their end it is necessary carefully to ventilate premises. For hand guard to apply rubber gloves. To take care from fire! |
|
grey