Explicação, anotação:For priming of metal (including of automobile) and wood
surfaces under compensations by different enamels
Descrição porminorizada da marca:The technical characteristic
the film colour of prime coating - brown, the tint is not standardized
the exterior appearance of film - smooth, the homogeneous surface
the mass fraction of low-volatile matters, % - 54-64
the funnel viscosity on type viscometer of ÂÇ-246 with diameter
combustor 4 MM (ÂÇ-4) at a temperature of (20, 0_ 0, 5) °C, with, no less than - 50-90
the drying time to the extent 3
in case of (105_ 5) ° c, minute. not more - 35
in case of (20_ 2) ° c, ch, not more - 48
the film adhesion, the severity, not more - 1
the film strength in case of hit instrument of type Ó-1, the cm, no less than - 50
the film elasticity in bending, the MM, not more - 1
the compensation durability to static action , ch, no less than
3 %-íîãî of sodium chloride brine in case of - 24
mineral oil in case of (20_ 2) ° c - 48
nitroenamel - must not be wrinkling and nitroenamel cracking |
Condições de fornecimento:
|
 |
