MRT-3501
* MRT-3501 | For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ of stainless steels and cruciform compound of fixture and can
be applied to small workshop.
|
MT-1202 UHL4
* MT-1202 UHL4 | For resistance spot welding of part from low carbon and íåðæàâåþ
ùèõ steels, as well as cruciform compound of steel rods. Has
the treadle of compression - without pneumatic drive.
|
MT-1202-1 UHL4
* MT-1202-1 UHL4 | For resistance spot welding of part from low carbon and íåðæàâåþ
ùèõ steels, as well as cruciform compound of steel rods. Has
the pneumatic drive of compression.
|
MT-1701
* MT-1701 | For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ of stainless steels and cruciform compound of fixture and can
be applied to small workshop.
|
MT-1861
* MT-1861 | For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of àðìàòó bars
RU to d 18 and can be applied to small workshop.
|
MT-1961
* MT-1961 | For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of fixture to d 20
and can be applied to small workshop.
|
MT-2221
* MT-2221 | For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ of stainless steels and cruciform compound of fixture and can
be applied to small workshop.
|
MT-2361
* MT-2361 | For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of àðìàòó bars
RU to d 18 and can be applied to small workshop.
|
MT-2661
* MT-2661 | For resistance spot welding by the alternate current of parts from ìàëîóãëåðî
äèñòûõ stainless steels and cruciform compound of àðìàòó bars
RU to d 20 and can be applied to small workshop.
|
MTV-10001
* MTV-10001 | For resistance spot welding by the rectified current of large from
Delia of responsible appointment from aluminium, titanium and copper joint venture
longwalls, heat-resistant, non-corrosive and low-carbon steels.
|
MTV-8002-1
* MTV-8002-1 | For resistance spot welding of envelope etc. load-bearing structures from
aluminium, titanium, non-corrosive, heat-resistant and carbon steels
depth to 15 MM, as well as some marks brass and bronze.
|
MTM-207-1
* MTM-207-1 | For dotted multiple-electrode welding of planar reinforcing nets from
rods of reinforcing steel of classes of AI, AII, AIII, BI.
|
MTM-303 UHL4
* MTM-303 UHL4 | For unwinding, dressings, formings, assemblings and contact welding
reinforcing frameworks from wire by the diameter 5 MM and three of longitudinal
fixtures by the diameter 8 MM, as well as mechanized discharging.
|
MTM-32
* MTM-32 | For resistance welding of heavy reinforcing nets. With the aim of
reduction once only power consumption aboard
the welding modes in 4 queues and the weld in "chess" procedure are provided.
|
MTN-10001
* MTN-10001 | For resistance spot welding low-frequency current of products from àëþìèíè
åâûõ, heat-resistant and titanium alloys. The application of low-frequency current
allows to reduce the power consumption 1, 5 time.
|
MTPV-01; MTPV-02
* MTPV-01; MTPV-02 | For resistance spot welding rectified in secondary current circuit
pages from low-alloyed steel by the depth to 1, 5 MM, as well as welding
SIF of these pages to stiffening elements by the depth to 4, 0 MM.
|