Aclaración/resumen:For hydraulic insulations and levelling of surface of different building constructions: brick, concrete, reinforced concrete.
Descripción completa de la marca:Ëàõòà - water-proof singlecomponent composition. It represents the granular powder in Elephant-grey, containing no the clots and mechanical impurities. In the composition of plaster hydraulic insulation the portland cement, the quartz filling agent are included and active polymer chemical agents.
the surface treatment.
the solution are deposited spatula. Coating depth of plaster hydraulic insulation 4-20 MM. To make the mixtures stacking by layers by the depth not more 10 MM. There may be the stacking on reinforcing the mesh. Using reinforcing mesh the layer thickness of coating shall not exceed 20 MM.
after stacking of primer to coating of second layer has to be spent no less than 8 hrs.. In case of stacking of plaster hydraulic insulation at the surface, strongly absorbing the water, it is necessary to use the prime coating. As a prime coating can be used the latex ïëàéìåð or the prime coating, prepared from dry mixture of surface waterproofer of Ëàõòà and water in ratio of 1: 1.
technical characteristics:
1. Mark on watertight. W12
2. Increase of quality class on watertight in case of layer coating by the depth:
- 4 MM. 2 stages (W12)
- 20 MM. 3 stages (W12)
3. Mark on compression strengths, no less than. Ì200
4. Mark on freezing resistance, no less than. F75
5. Cohesive strength with concrete, MPa, no less than. 1, 6
6. Corrosion resistance, pH. 3-13
7. Compensation durability to action of shining
and black products. Gamely
8. Ultraviolet. The effects
9 does not renders. Solution viability, hrs.. 4
10. Mobility of mixture. Ïê2
11. Oversize #2, 5, ïðîö. no less than. 2
12. Soil moisture retention capacity, ïðîö. no less than. 90
12. Applicability for reservoirs of drinking water. Shall be allowed
13. Material application. All êëèìàòè÷åñèå
14. Middle material consumption, êã/ì^2. 1, 5
14. Material coating at a temperature of, degree. S. +5 - +30
15. Guarantee period of storekeeping, months. 6 |
Condiciones de suministro:
| Precio: contractual por l |
|
|
