FISinter (to initial point)
Code Page utf-8 		Das föderative Informationssystem über Güter und Dienstleistungen
FISinter
Подсистема «Информация производителей продукции»

Wälen Sie die Sparche
Die Suche der Information
Die Unterbringung der Information
Einzelheiten
Настройки браузера
Архив

Hydrotechnische Ausrüstungen

Zentrifugalpumpe _________ H


Für diese Marke gibt es die Modifikationen - wählen Sie unten nach dem Kennenlernen die Inhaltsangabe und die ausführliche Beschreibung

Die Erklärung/Inhaltsangabe:

Cantilever one-step. For swapping chemically active liquids by the density not more 1850 êã/ì.

Die ausführliche Beschreibung der Marke:

Temperature pumped fluid from 273 to 363 to (from 0 to +90 degree. C).
the pumps widely are used in chemical, petrochemical, pulp and paper and other industries. The pumps are being manufactured in industrial execution.
the pump case is established and is secured by two clamping flanges, on one of which is accomplished the landing pads to be borne on base slab.
electrically driven pumps are being manufactured with ïðîñòàâêîì in flexible coupling, that allows to produce pump ðàçáîðêó without decatenation of suction conduit. The bearing is clamped to base slab and has the auxiliary leg on the part of. The impeller is rotated in two bearing assemblies, lubricated by the êîíñèñòåíòîé lubricant.
the impeller - close-ended.
the pumps are being manufactured with single Salnikov or single mechanical face seal. Material of flowing part - chrome cast iron.

  Die Modifikation/Spezifikation
Маркировка модификации
Inter
Nat.		Submission, m Cuba. /÷ pressure head, m rotational speed, with ( îá/ìèí) net positive suction head, m pump mass, kg
1 H 50-32-125
H 50-32-125		12, 5 20 48 (2900) 3, 5 42
2 H 65-50-125
H 65-50-125		25 20 48 (2900) 4, 0 62
3 H 80-50-160
H 80-50-160		50 32 48 (2900) 4, 5 73
4 H 80-50-200
H 80-50-200		50 50 48 (2900) 4, 5 85
5 H 100-80-160
H 100-80-160		100 32 48 (2900) 5, 0 100
6 H 150-125-315
H 150-125-315		200 32 24 (1450) 4, 5 200