FISinter (to initial point)
Code Page utf-8
Das föderative Informationssystem über Güter und Dienstleistungen
FISinter

Подсистема «Информация производителей продукции»

Wälen Sie die Sparche
Die Suche der Information
Die Unterbringung der Information
Einzelheiten
Настройки браузера
Архив

Elektrotechnik- und Kabelerzeugnisse und -Ausr'stungen

Handantrieb _________ PRG-6

 
Das Land: Russia
 
 Der Lieferantentyp: Warenhersteller  
 Die Information über den Lieferanten  ProduktionsIdentifizierer

Die Erklärung/Inhaltsangabe:

Îäíîâàëîâûé. For operating on male cutters or earthing rods ðàçúå äèíèòåëåé of new of the series of ÐÃ on nominal n ïðÿæåíèå 110 and 150 apartment.

Die ausführliche Beschreibung der Marke:

The structure of notation convention ÏÐÃ-6ÓÕË1 p _ the drive r _ manual year _ switching devices of p type are accomplished on the basis of sealed-contact reed relays 6 _ modification õõ _ the execution according to number of the switched âñïîìîãàòåëü Noy chains of p 00 _ 16 chains (for isolating switches) 01 _ 8 chains (for earthing rods) ÓÕË1 _ the environmental category and the category of allocation according to the state standard 15150 operation condition the altitude above sea level, not more, M.. 1000 lower working value of ambient air temperature - 60°Ñ high value of ambient air temperature + 40°Ñ technical characteristics turning angle of driving shaft, degree. 190 type of blocking. Electromagnet supply voltage of chains blocking, V.. 220 degree of dust protection and rain. 1Ð63 according to the state standard 14254 the drive consists of the housing 1, driving shaft 2 with disc 3, mechanism fixation 4, switching device 5 p types, electromagnetic package èðîâêè 6 on the basis of áëîê-çàìêà 3Á-1Ì, cable inlet 7. the pipe of cable inlet 7 hard is fastened to a housing 1 and is one temporarily directing for vertical displacement of case 8, which are being pressed through rubber strip 9 to a housing 1 nut 10. The access in internal transmission mechanisms (when mounting the and debugging) is carried out after nut unscrewing 10 and the case lowering 8 homes 11, on to torus the grounding bolt of drive is established. for connection with isolating switch shaft or grounding on driving shaft drive is fastened the terminal coupling 12, to which hinged are fastened ðóêîÿ operating on transport spacecraft 13. For operating on it is turned in horizontal the humanitarian aid provision and is fixed by the fixator 14, and at the end operating on is established the upright

Die Bedingung der Lieferung:

Preis: der Vertragspreis für itm