Schiaramento/annotazione:Hangar.
Descrizione del marchio dettagliata:In hangar it is possible to place the warehouse, the depository, ìèíè-öåõ, the garage, the sport hall, trade pavilion. Production should be with non-aggressive or ñëàáîàãðåññèâíîé environment. Design are being manufactured according to construction norms and specification of III-18-75. Frame arc consist of assembled sections, bonded by bolts, lean upon basement and are welded to puted elements. Total building stability is provided by relations, ïðîãîíàìè and compensation. Compensation Angara - from êðàøåííûõ or galvanized shaped sheets - single for cold or double for warming the buildings, is conducted on metal playings with the help of self-tapping screws and combined rivets. As a warmer are used mineral-cotton plate, for vapour barrier are being applied polyethylene film. In base model pairoar gates are located in butt-ends. Optional they can be other designs and be located according to appointment of building. If required the hangars are being completed window frames with molded rubber strip for fixing of glass. The building assembling is made on prepared ground with basement. Are recommended following alternatives of foundation: - concrete pillar; - using of product æ/á; - metallic frame, guyed by anchors, which are driven in the soil, and then are welded to frame. Assembling simplicity, the small fixed weight allow to carry out assemblies in a short period of time and with minimum use of lifting funds. In the process of introduction into production of hangar with overhead crane by girders by the carrying capacity 5 heat pumps. |
Condizzioni di fornamento:
|
 |
