L'explication/l'anotation:To get high-quality crushed stone and grit in deposits èçâå
ðæåííûõ and sedimentary rocks with small, as a rule from 5 to 15 million ì3
, raw stocks. Possibly also use of waste products.
La description détaillée de marque:Technical characteristics:
annual products output (in the zone with moderate climate) thousand ì3. 480
including:
fraction crushed stone from 5 to 10 MM. 60
above 10 to 25 MM. 140
over 20 to 40 MM. 200
grit of enriched from crushing siftings of fraction
above 0, 14 to 5 MM. 80
burst performance on source of ïèòàíèþ ì3/÷. 180
maximum size of source rock massive, MM. 750
total of maximum capacity of a unit, kilowatts. 900
total weight of units, T.. 950
building area of enterprise, created on the basis of ÑÀÄË-È-400, hectare. 2, 7
raw goods requirements:
upper limit of pieces, MM. To 750
strength, MPa. To 300
number of polluting ëåãêîïðîìûâàåìûõ
inclusions, %. To 5
the abrasive hardness degree is not limited to.
composition:
ÑÀÄË-È-400 consists of separate units of full plant
readiness:
- unit of primary crushing with jaw crusher of ÙÄÏ of 9Õ12;
- unit of secondary crashing with cone crusher of ÊÑÄ 1750 growth hormone GH;
- unit of fine crashing with cone crusher ÊÌÄ 1750 growth hormone GH;
- unit sorting with two inertial cribbles ÃÈÑ-62;
- unit washing with spiral classifier 1 ÊÑÍ-15;
- bin with apron feeder 1-15-90;
- áóíêåð-ñêëàä finished product with blending weigher (4 state. ;
- conveyer tape stationary with tape width 1000 MM (2 state. ;
- conveyer piler with tape width 800 MM (6 state). |
