Explanation/Annotation:Multi-stream. In the manufacture of polymer capacities by the blow method. Primary raw material: polyethylene, polypropylene.
Detailed model description:Main nodes of design:
- device of heating and preparation of production;
- automated manipulator for blank transfer in the zone of blow;
- closure mechanism of compression molds;
- structural design - monoblock unit;
- the control box.
the semiautomaton is equipped with the pneumatic equipment key companies of manufacturer.
the completing by extrusion heads:
- dual-stream for products from 0, 75 to 1, 5 litres - base enters the delivery set;
- òðåõðó÷üåâàÿ for products from 0, 3 to 0, 75 litres - ñïåöçàêàç Is outside the delivery set;
- ÷åòûðåõðó÷üåâàÿ for products from 0 , 05 to 0, 3 litres - ñïåöçàêàç is outside the delivery set.
the technical characteristics:
1. Automatic machine capacity (for capacities 1, 0 l), state of /÷àñ. 400;
2. Working pressure, MPa. 0, 6;
3. Air consumption, ì^3/ìèí. 0, 3;
4. Water expenditure, ì^3/÷àñ. 1, 5;
5. Water temperature, degree. S. 10-12;
6. Installed capacity, kilowatt. 13;
7. Power consumption, kilowatt. 8;
8. Overall dimensions:
length, MM. 2700;
width, MM. 980;
height, MM. 2235;
9. Mass, not more, kg. 1800;
10. Maintenance staff, human being. 1. |
